Release Note for Naptatech Link™ Capture Software version 12.1.3 for Linux
Release date
2020-01-28
Description
Software package version ntanl_package_3gd-linux-12.1.3.
The Link™ Capture Software 12.1.3 maintenance release includes resolution to one problem report regarding SDRam CRC errors on NT40E3 with 200-9537 FPGA image installed.
The Link™ Capture Software 12.1.x release series introduces support for 2x10/25G on the Napatech NT200A02 SmartNIC. With this extension the NT200A02 SmartNIC supports a broad range of use cases requiring 10G, 25G, 40G and 100G network connectivity.
- 8x10G
- 2x10/25G BASE-SR, LR and LR-BiDi(NEW)
- 2x40G
- 2x100G
Operating systems
The Napatech software package applies to these operating systems:
- Linux 3.0 -> 3.19 (64-bit)
- Linux 4.0 -> 4.18 (64-bit)
- Linux 5.0 -> 5.03 (64-bit)
The software has been qualified on: CentOS 7 and CentOS 8
Hardware / FPGA images
| Hardware | FPGA images | Description |
|---|---|---|
| NT20E3-2-PTP | 200-9501-27-03 | 2x10G port speed |
| NT40E3-4-PTP | 200-9502-10-07 | 4x10G port speed | 200-9537-27-03 | 4x10G port speed Capture |
| NT80E3-2-PTP | 200-9503-22-08 | 2x40G port speed | 200-9519-22-07 | 8x10G port speed |
| NT200A01 | 200-9515-20-06 | 2x100G port speed Capture | 200-9516-20-06 | 2x100G port speed Replay | 200-9531-20-14 | 2x10/25G port speed | 200-9512-22-07 | 2x40G port speed | 200-9522-22-07 | 8x10G port speed |
| NT40A01-4x1 | 200-9500-27-02 | 4x1G port speed |
| NT100E3-1-PTP | 200-9505-20-07 | 1x100G port speed |
| INTEL-A10 | 200-7000-27-02 | 4x10G port speed | 200-7001-27-02 | 1x40G port speed |
| NT200A02 | 200-9521-27-03 | 2x100G port speed | 200-9526-27-03 | 2x40G port speed | 200-9532-27-03 | 2x10/25G port speed | 200-9533-27-03 | 8x10G port speed | 200-9534-21-28 | 8x10G port speed, Capture Flow Management | 200-9535-21-28 | 2x40G port speed, Capture Flow Management | 200-9539-23-01 | 8x10G port speed, CPU Socket Load Balancer | 200-9540-23-01 | 2x40G port speed, CPU Socket Load Balancer |
Driver version
3.19.1
LibPCAP version
3.18.1
Tools version
3.19.1
ImgCtrl version
3.10.2
Test status
Complete test plan.
Documentation
Documentation is available in the "Documentation" folder.
Release note generated at
2020-01-28