Release Note for Napatech Link™ Inline Software version 2.0.0 for Linux
Release date
2021-09-21
Description
Software package version ntinl_package_3gd-linux-2.0.0.
Notes
The Napatech Link Inline Software 2.0.0 release introduces support for Flow management for these FPGA images:
- NT100A01:
- 9553-46-06 (4x10x25G)
- 9559-46-06 (4x1/10G)
- NT200A02:
- 9534-46-06 (8x10G)
- 9535-46-06 (2x40G)
- 9536-46-10 (2x100G)
Installation instructions:
To generate a correct ini-file for inline configuration, start the ntservice executable with the following argument:./ntservice QMEnable=0
When using more than one adapter, the argument(s) must specify the adapter number. For example, if adapter 1 and 2 are used for inline configuration then do as follows:
./ntservice Adapter1.QMEnable=0 Adapter2.QMEnable=0
Once the ini-file has been generated, the additional arguments are no longer necessary.
Operating systems
The following operating systems are supported:
- Linux 3.0 -> 3.19 (64-bit)
- Linux 4.0 -> 4.18 (64-bit)
- Linux 5.0 -> 5.11 (64-bit)
The software has been qualified on: CentOS 7 and Ubuntu 20.04
Hardware / FPGA images
| Hardware | FPGA images | Description |
|---|---|---|
| NT200A02 | 200-9534-46-06 | 8x10G, Capture Flow Management (FM1) |
| 200-9535-46-06 | 2x40G, Capture Flow Management (FM1) | |
| 200-9536-46-10 | 2x100G port speed, Capture Flow Management (FM1) | |
| NT100A01 | 200-9553-46-06 | 4x10/25G, Capture Flow Management (FM1) |
| 200-9559-46-06 | 4x1/10G, Capture Flow Management (FM1) |
Supported server architectures
- Intel x86 64 bit
- AMD EPYC Gen2 64 bit
Driver version
3.25.3
LibPCAP version
3.19.1
Tools version
3.25.3
ImgCtrl version
3.14.5
Test status
Complete test plan
Documentation
Documentation is not included in this package.
Release note generated at
2021-09-21